Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

$23.39
Increase your hydration capacity with Origin-8's HydroRail Double Seat Bracket. This bracket mounts to your saddle rails and holds two bottle cages. And, the angle is fully adjstable so you can customize it to keep your bottles within easy reach. Bottles and cages sold separately.
$50.00
The durable Hydration Bladder 3 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%. - Can be filled with hot or cold water (up to 60°C) - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Volume: 3L - Weight: 140g - Measures: 18 x 42 x 1cm
$50.00
The BPA- and PVC-free Hydration Bladder 2 Insulated with insulated hose and a 20% increase in water flow lets you lap it up on even the coldest day in the snow. - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Can be filled with hot or cold water (up to 60°C) - Volume: 2L - Weight: 140g - Measures: 17 x 32 x 1cm
$9.99
On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061
$5.00
Longneck grip-styled coozie accommodates 12 to 16oz cans.
$12.00
Adapter for direct mounting of the Fuel Pack or other equipment with screw connections. Are you planning to mount the Fuel-Pack or a bottle holder on your bike but find the threaded holes are not in the right place? The Offset-Plate 64 MM gives you a flexible way of adjusting the position of the Fuel-Pack, a bottle holder or other equipment with screw connections.
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter
$12.99
SKS's Cage Box offers light, simple storage for your on-the-go essentials. With enough room for your tools, mini pump, and a tube, the Cage Box slides easily into your water bottle cage for a rattle-free, easy access storage solution.
$26.99
The new, low-gravity horizontal bladder has a 2L hydration capacity, and ships with a tube and 45° bite valve. The tube is 1m in length, providing better flow, the bladder is burst tested, and it is FDA and EU approved, meaning that it is Phthalate, BPA, and PVC-free. With a hose connector that has a push-lock function and auto shut-off valve, the bladder also has a tethered top hanging clip and hanging loops that allow you to dry it. - 2.0L / 70oz - Horizontal, low-gravity bladder - Hanging loops for drying — inside and outside the bladder - Tethered top hanging clip - 1m length tube with better flow - FDA and EU approved: Phthalate, BPA and PVC-free - Burst tested - Push-lock hose connector with auto shut off valve - Ships with 45° bite valve
$29.99
This bladder kit has a two-liter bladder volume capacity and sports a center baffle system with a zip that ensures bladder remains flat and that liquid does not splash around in the bladder. It also enables proper cleaning, as you can unzip it to clean it inside out. It ships with two tubed and bite valves, namely a hands-free tube with with 180º valve and a standard tube with 45º valve. - Dishwasher-safe - Center baffle system with a zip - Bladder remains flat when zipped - Liquids do not splash around in bladder - Unzip to clean inside out - Hanging loops for drying – inside and outside the bladder - Tethered top hanging clip - FDA and EU approved: Phthalate, BPA and PVC-free - Burst-tested - Twist-Lock hose connector with auto shut-off valve - Ships with two tube and bite valve kits - Hands-free tube with 180º valve - Standard tube with 45º valve - One-touch quick release valve on the hands-free tube system - Helmet Velcro patch and loops to keep system in place for the hands-free system
$8.95
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.
$10.00
Keep your water bottles clean and free of mysterious foreign objects. The CamelBak Bottle Brush Kit includes a large brush for scrubbing the inside of your bottle as well as small straw brush for cleaning the straw, cap, and bite valve.
$79.95
XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
$29.95
This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo
$6.99
CamelBak's Ergo HydroLock controls your fluid flow with the flip of a switch. Turn it on to drink, turn it off for added security during transport. Simply insert it into the end of your CamelBak drinking tube and attach the valve to the other end. Plus, the 90-degree bend makes sipping on the go a cinch!
$4.99
- Customize your race belt with this lightweight slide on accessory - Holds up to four gel packs - Compatible with all Ergo & Ultralight Belts
$49.95
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.
$12.00
The Replacement Activated Carbon Filter is compatible with the Crux 2L Reservoir Filtration Kit filtered by LifeStraw or the Reservoir Filter Kit accessory. Chlorine is reduced and bad odor and taste are removed when paired with an existing Hollow Fiber Filter and used as part of the two stage LifeStraw filtration system.
$59.95
Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs. - Material: Pressed aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5 kg / 5.5 lb - Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage - Added Feature: 2 angle positions - Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7” - Weight: 97 grams
$74.95
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
$5.95
Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!
$12.00
Profile Design bottle cage storage securely and conveniently uses your bottle cage as a cargo carrier. The screw-top, bottle-shaped containers carry necessities—whatever you need along the way.
$12.00
- Extra-strong magnet keeps the drinking tube in position during your activity. - Two-piece design for attachment to the hip belt, backpack or vest - Fits all EVOC hydration systems (excluding insulated drinking tubes)
$99.99
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
$11.00
The Crux reservoir on/off valve pairs with CamelBak's Big Bite valve and tune. Using an integrated valve, water flow shuts off for added security during transport.
$36.95
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
$45.00
The Dakine 3L Hydrapak design of the Replacement Reservoir is engineered to be durable and easy to use. The Shape-Loc center baffle adds some rigidity to the shape of the bladder, which cuts down on shifting of water weight while you're in motion and makes for a more resilient design. Meanwhile, the wide-mouth opening and plug-and-play connecters make it easy to fill, drain, and clean. And, of course, it's BPA- and PVC-free.
$9.99
Replacement bite valve for Leatt hydration helmet kits.
$7.95
Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.
$11.99
- Universal bar mount bottle cage adapter fits 22.2-35mm diameters - Can be adjusted to any angle using the provided 4mm hex wrench - Tough nylon composite construction - Bottle cage not included
$17.99
- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars - Compatible with handlebars from 22mm to 36mm
$14.99
Mount any water bottle cage using our Cage Strap Adapter to any diameter of 3.25" or less. This will allow you to mount a water bottle in all kinds of different areas on your bike—you choose what is best for you! The extra-wide length can be cut to your desired length. The Adapter won't move around because it has a rubber base and compresses on your frame when mounted.
$127.95
Introduction - Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years. - Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag. Storage - We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the XLAB MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top X-STRAP. - As you can see, you have two choices for storing your Air Strike CO2 cartridges and NANOFLATOR, or XLAB SPEED CHUCK on the rear of the CARBON WING, using the optional hexagonal X-NUT or in the XLAB MINI BAG. - Tires and tubes are always an issue, so now you can attach them neatly under the CARBON WING inside the XLAB MEZZO BAG. Hydration - With the CARBON WING you can use a single Aqua Shot bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA cage or the GORILLA XT cage for rear carriers. Adjustable Mounting - One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB Super Wing for customizing the installation. - In addition, there are 4 sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions. Lightweight - We use the latest aerospace aluminum alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB Super Wing weighs only 85 grams. Bottom Line - The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros! Includes: - Carbon Sonic chassis - One Pair X-Straps - All hardware and instructions Material - Carbon Fiber proprietary unidirectional orientation. Weight - Chassis 49 grams, Hardware 30 grams. Total 79 grams Limited Lifetime Warranty - Because of our engineering and testing for this product we give it a Limited Lifetime Warranty to the original owner.
$50.00
- Leak-proof and easy to fill with SLIDE SEAL - PLUG-N-PLAY allows quick removal of the hose - Free from BPA and PVC
$19.95
The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes
$12.00
The EVOC Bite Valve is a mouthpiece for the drinking tube of your Hydration Bladder. - Self-closing silicone stream valve - Leak-tight seal against escaping liquid - Taste-neutral material for pure flavor
$9.50
- Individually packaged - Enables mounting of a bottle cage in a variety of positions - Fits 22.2-26.0mm handlebars
$19.00
New Crux tube offers 20% more water per sip, and with the insulated thermal sleeve your water stays cooler in warm weather.
$9.95
All metal cup made of 304 Stainless Steel.
$21.95
XLAB's Aero Cage Optimizer is a cool little device that mounts onto the bottle mounts on your frame or aero-bar or rear hydration system. Once in place, it lets you adjust your cage up, down, forward or backwards up to 1.75 inches so that everything fits and works the way you want it (cages sold separately).
$11.00
Keep your reservoir funk-free with this cleaning brush kit from CamelBak.
$35.00
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in
Probably the easiest way to clean your reservoir, CamelBak's Cleaning Tablets work in just five minutes. They prevent bacteria buildup, odor, and get rid of bad taste. One tablet cleans a 100-ounce reservoir.
$50.00
The durable Hydration Bladder 2 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%. - Can be filled with hot or cold water (up to 60°C) - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Volume: 2L - Weight: 130g - Measures: 17 x 32 x 1cm
$29.99
Staying hydrated is basic safety! Mental and physical performance drops quickly when you run out of liquids. Stay hydrated and stay fast with this hands-free hydration kit.
$7.00
CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.
$31.00
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 30 x 18 x 6 cm/ 12 x 7 x 2.5 in
$8.95
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
$99.95
• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.
$10.95
XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
$9.99
BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
$6.00
Ortlieb O-Strap Adjustable Rubber Strap - 190mm - Black - Soft material keeps items secure and helps prevent scratching
$9.95
XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
$29.99
Sleek water bottle shaped organizer that fits into standard bottle cages. Internal compartments, including one zippered, organize small cycling essentials—including tire repair, snacks, personal items and more. It features a soft, semi-rigid shell that’s durable and water resistant. A full zipper allows for a full 180° opening, providing easy access and better organization. Its all black design, with black logos, matches with all styles of bicycles.
$102.95
Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
$24.95
B-RAD Everywhere Base 2
$45.00
Update or replace your lumbar reservoir. This 2-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 70-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking. - 2L / 70 oz Dakine x Hydrapak 3D lumbar reservoir - Blaster high-flow bite valve w/shut-off - Quick-disconnect tubing for easier refills - Molded 3D bottom provides better shape inside the pack - Molded 3D bottom for much better drying between rides
$4.99
- Customize your race belt with our removable micro race locks with quick release clasp - Fully adjustable race bib toggles - Hi-viz reflective accents - Compatible with all Ergo & Ultralight Belts
$24.99
The smallest bladder from Leatt, the Flat CleanTech 750 has a volume capacity of 750ml and is designed to pair with the Ultra 750 Hydration. It ships with both a hands-free tube with a 180º valve, as well as a standard tube with a 45º valve. - Dishwasher-safe - Profiled shape for maximum flow - Hanging loops for drying – inside and outside the bladder - Tethered top hanging clip - FDA and EU approved: Phthalate, BPA and PVC-free - Burst tested - Twist-Lock hose connector with auto shut-off valve - One-touch quick release valve on the hands-free tube system - Helmet Velcro patch and loops to keep system in place for the hands-free system
Page 1 of 2 Next page