Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Topeak Tri-BackUp Air Station
$17.95
Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump. - Material: Engineering grade plastic - Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge - Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I - Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3” - Weight: 30 grams / 1.06 oz *Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included
Sunlite Adjustable Bottle Cage Mount
$17.99
- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars - Compatible with handlebars from 22mm to 36mm
Minoura SBH Saddle Bottle Cage Adapters
$18.99
- Saddle rail mounted cages are a great solution for triathletes or anyone looking for more bottle cage options - Model SBH-300 Aluminum adapter clamps to saddle rails for dual bottle cage location behind the saddle, hardware included - Model SBH-80 Steel adapter clamps to saddle rails for single bottle cage location behind the saddle, hardware included
Minoura SGS-400-OS Clamp
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Minoura SGS-400-STD Clamp
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter
Wolf Tooth B-RAD Bottle Shift
$19.95
The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes
Surly Monster Squad Silicone Pint Glass
$20.00
Fill it with water and set it on the nightstand. Pack it in your bag for a cold drink on the trail. However you use it, Surly's Silicone Pint Glass is a lot like a normal pint glass except it's less likely to break if you fall off your bike or accidentally knock it over during a scary dream. - Great insulation to keep beverages cold - Made of taste-free, odor-free, dishwasher-safe, 100% food-grade silicone
XLAB Aero Cage Optimizer
$21.95
XLAB's Aero Cage Optimizer is a cool little device that mounts onto the bottle mounts on your frame or aero-bar or rear hydration system. Once in place, it lets you adjust your cage up, down, forward or backwards up to 1.75 inches so that everything fits and works the way you want it (cages sold separately).
Lezyne Flow Storage Cage
$21.99
Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 94g
Origin8 HydroRail Double Seat Bracket
$23.99
Increase your hydration capacity with Origin-8's HydroRail Double Seat Bracket. This bracket mounts to your saddle rails and holds two bottle cages. And, the angle is fully adjstable so you can customize it to keep your bottles within easy reach. Bottles and cages sold separately.
Topeak DP Mount
$24.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Wolf Tooth B-RAD Everywhere Base 2
$24.95
B-RAD Everywhere Base 2
Leatt Bladder Kit Flat CleanTech 750
$24.99
The smallest bladder from Leatt, the Flat CleanTech 750 has a volume capacity of 750ml and is designed to pair with the Ultra 750 Hydration. It ships with both a hands-free tube with a 180º valve, as well as a standard tube with a 45º valve. - Dishwasher-safe - Profiled shape for maximum flow - Hanging loops for drying – inside and outside the bladder - Tethered top hanging clip - FDA and EU approved: Phthalate, BPA and PVC-free - Burst tested - Twist-Lock hose connector with auto shut-off valve - One-touch quick release valve on the hands-free tube system - Helmet Velcro patch and loops to keep system in place for the hands-free system
Leatt Flat CleanTech 2L Horizontal Bladder
$24.99
The new, low-gravity horizontal bladder has a 2L hydration capacity, and ships with a tube and 45° bite valve. The tube is 1m in length, providing better flow, the bladder is burst tested, and it is FDA and EU approved, meaning that it is Phthalate, BPA, and PVC-free. With a hose connector that has a push-lock function and auto shut-off valve, the bladder also has a tethered top hanging clip and hanging loops that allow you to dry it. - 2.0L / 70oz - Horizontal, low-gravity bladder - Hanging loops for drying — inside and outside the bladder - Tethered top hanging clip - 1m length tube with better flow - FDA and EU approved: Phthalate, BPA and PVC-free - Burst tested - Push-lock hose connector with auto shut off valve - Ships with 45° bite valve
Profile Design Aerodrink BTA Water Bottle Bracket
$29.00
The Aerodrink BTA bracket offers secure bolt-on bottle mounting to aero bars and adapts to a variety of extensions. It includes a durable restraining strap for easy bottle installation and removal and an adapter to fasten horizontal BTA hydration systems. - Fits single and dual chamber systems along with horizontal BTA systems (with included adapter) - Attaches to bars with bolt-on adjustable wings that adapt to different aero bar width extensions - Adjusts to 140mm wide - Compatible with Profile Design FC25/FC35 hydration systems, Aero HC bottles, Aqualite bottles, Aerodrink bottles, Aquacell bottles, and standard bottles and cages - Made of Injected Nylon and Glass fiber - Weight: 130g
Bar Mitts Winter Bot Water Bottle Pogie
$29.95
This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo
Wolf Tooth B-RAD Everywhere Base 3
$29.95
B-RAD Everywhere Base 3
Leatt Bladder Kit Flat CleanTech 2L
$29.99
This bladder kit has a two-liter bladder volume capacity and sports a center baffle system with a zip that ensures bladder remains flat and that liquid does not splash around in the bladder. It also enables proper cleaning, as you can unzip it to clean it inside out. It ships with two tubed and bite valves, namely a hands-free tube with with 180º valve and a standard tube with 45º valve. - Dishwasher-safe - Center baffle system with a zip - Bladder remains flat when zipped - Liquids do not splash around in bladder - Unzip to clean inside out - Hanging loops for drying – inside and outside the bladder - Tethered top hanging clip - FDA and EU approved: Phthalate, BPA and PVC-free - Burst-tested - Twist-Lock hose connector with auto shut-off valve - Ships with two tube and bite valve kits - Hands-free tube with 180º valve - Standard tube with 45º valve - One-touch quick release valve on the hands-free tube system - Helmet Velcro patch and loops to keep system in place for the hands-free system
Leatt Hydration Hands-Free Kit
$29.99
Staying hydrated is basic safety! Mental and physical performance drops quickly when you run out of liquids. Stay hydrated and stay fast with this hands-free hydration kit.
Lezyne Flow Tool Caddy Pro
$29.99
Sleek water bottle shaped organizer that fits into standard bottle cages. Internal compartments, including one zippered, organize small cycling essentials—including tire repair, snacks, personal items and more. It features a soft, semi-rigid shell that’s durable and water resistant. A full zipper allows for a full 180° opening, providing easy access and better organization. Its all black design, with black logos, matches with all styles of bicycles.
evoc Hydration Bladder 2
$35.00
The durable Hydration Bladder 2 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%. - Can be filled with hot or cold water (up to 60°C) - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Volume: 2L - Weight: 130g - Measures: 17 x 32 x 1cm
USWE 1L Elite Bladder with Plug-n-Play Coupling
$36.95
The Elite is a revolutionary reversible bladder. The design of the Elite allows users to easily maintain cleanliness. The patented wide slide top opening allows for fast filling and secure seal. To clean, simply slide open, reach in, reverse, and rinse. The hydration bladder is made out of TPU (thermoplastic polyurethane) and comes complete with a 45 degree Blaster bite valve, easy quick connector with Plug-n-Play and flexible non-kinking Hydraflex drink tube. The hydration system is reversible for easy cleaning and drying. The hydration bladder has a patented wide slider opening for quick filling and leak proof seal and also has RF welded seams to create superior bonds at a molecular level. The hydration bladder is BPA and PVC free and is made out of FDA and EU approved materials. It is also dishwasher safe and is naturally Anti-fungal. This product is made by Hydrapak LLC for USWE Sports AB.
XLAB Torpedo Versa Mount - Aluminum
$36.95
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
USWE 2L Elite Bladder with Plug-n-Play Coupling
$37.95
The Elite is a revolutionary reversible bladder. The design of the Elite allows users to easily maintain cleanliness. The patented wide slide top opening allows for fast filling and secure seal. To clean, simply slide open, reach in, reverse, and rinse. The hydration bladder is made out of TPU (thermoplastic polyurethane) and comes complete with a 45 degree Blaster bite valve, easy quick connector with Plug-n-Play and flexible non-kinking Hydraflex drink tube. The hydration system is reversible for easy cleaning and drying. The hydration bladder has a patented wide slider opening for quick filling and leak proof seal and also has RF welded seams to create superior bonds at a molecular level. The hydration bladder is BPA and PVC free and is made out of FDA and EU approved materials. It is also dishwasher safe and is naturally Anti-fungal. This product is made by Hydrapak LLC for USWE Sports AB.
USWE 1.5L Compact Bladder with Plug-n-Play Coupling
$38.95
The Compact is a revolutionary reversible bladder. With its wide shape it's the perfect hydration bladder for hip packs such as our Zulo 6 model. The hydration bladder is made out of TPU (thermoplastic polyurethane) and comes complete with a 45 degree Blaster bite valve, easy quick connector with Plug-n-Play and flexible non-kinking Hydraflex drink tube. The hydration system is reversible for easy cleaning and drying. The hydration bladder has a patented wide slider opening for quick filling and leak proof seal and also has RF welded seams to create superior bonds at a molecular level. The hydration bladder is BPA and PVC free and is made out of FDA and EU approved materials. The hydration bladder is also dishwasher safe and is naturally Anti-fungal. This product is made by Hydrapak LLC for USWE Sports AB.
Dakine Replacement Reservoir 2L
$40.00
The Dakine 2L Hydrapak design of the Replacement Reservoir is engineered to be durable and easy to use. The Shape-Loc center baffle adds some rigidity to the shape of the bladder, which cuts down on shifting of water weight while you're in motion and makes for a more resilient design. Meanwhile, the wide-mouth opening and plug-and-play connecters make it easy to fill, drain, and clean. And, of course, it's BPA- and PVC-free.
evoc Hydration Bladder
$40.00
- Leak-proof and easy to fill with SLIDE SEAL - PLUG-N-PLAY allows quick removal of the hose - Free from BPA and PVC
evoc Hydration Bladder 2 Insulated
$40.00
The BPA- and PVC-free Hydration Bladder 2 Insulated with insulated hose and a 20% increase in water flow lets you lap it up on even the coldest day in the snow. - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Can be filled with hot or cold water (up to 60°C) - Volume: 2L - Weight: 140g - Measures: 17 x 32 x 1cm
evoc Hydration Bladder 3
$40.00
The durable Hydration Bladder 3 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%. - Can be filled with hot or cold water (up to 60°C) - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Volume: 3L - Weight: 140g - Measures: 18 x 42 x 1cm
XLAB Torpedo Reload Kit
$44.95
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.