Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Bells/Noise Makers

$12.99
Every commuter bike needs a good bell, and this is it: It's a Brass Bell. It's small, it's loud, it's not ostentatious, It's a Brass Bell. Greet your friends, alert pedestrians, put a ring on it! - Fits 22.2mm handlebars
$12.99
•Classic Straight design •Clamp fits most handlebars •10" length
$13.00 - $14.50
A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters
$13.50
Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
$13.50
Mirrycle's Incredibell Brass Duet Colors makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Its compact size lets you mount it just about anywhere on your handlebars. And, the bell's vibrant colors add a splash of personality to any bike. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
$13.50
Don't let the half-pint stature fool you, Mirrycle's little Incredibell Brass Solo packs the beautifully resonant ring of solid brass. Its compact size and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and it rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
$13.99
•Combines Ping bells and streamers •One bell on each end of the handlebar •Mounts inside handlebar under grips •Optional hand held use
$13.99
- 65mm Bell in the form of a bacon cheese burger - Adjustable handlebar mount - Universal nylon mount - Ringer style mechanism - Function: Lever
$13.99
Let everyone know your coming with Sunlite's Windmill Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed. And perhaps best of all, for added flair the windmill spins as you ride through the wind!
$14.50
The Omnibell has an adjustable band clamp. Its ingeniously designed dinger can be rotated to any position. This gives you flexibility in mounting the bell anywhere on your handlebar, making it very convenient to use either your thumb or another finger to ring the bell. Dome Diameter: 34mm (1.34") Fits handlebars with 22mm – 31.8mm (.87" to 1.25") outside diameters
$14.59
Powder-coated black brass bell that produces a loud, clear, and pleasant sound to alert pedestrians. - Split clamp allows the bell to be installed anywhere on the handlebar without removing grips or shifters. - Fits 22.2 to 28.6mm handlebars - Size: 35mm - Material: Brass
$14.99
Dimension Bulb Horns offer classic style and personality. - 9 inches in Length
$14.99
Let 'em know you're coming with a retro Nutcase bike bell. Thumb lever provides a traditional ringer sound. - Mount Location: Handlebar
$14.99
Mounts to the handlebar for easy access.
$14.99
Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell. This minimal bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.
$14.99
•Parrot Pirate •Fits most handlebars •Easy installation
$14.99
- Great novelty horn - Fits most handlebars
$15.00
Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring. - Fits handlebars with 22.2mm - 31.8mm (.87-inch - 1.25-inch) outside diameters - Dome Diameter: 44mm (1.6")
$15.00
Mirrycle's Incredibell Spring Bell offers a traditional Asian-style bell that integrates into the top cap of the headset to free up valuable handlebar space. The bell can be mounted any way you choose on the headset, and the dinger is adjustable as well. A flick of your finger and the Spring Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1.8") - Weight: Black and Silver: 26g (.9oz), Brass: 57g (2oz)
$15.00
Keep valuable handlebar space free with Mirrycle's Incredibell Striker Bell. It integrates into the top cap of the headset, can be mounted any way you choose, and features an adjustable dinger as well. A flick of your finger and the Striker Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1") - Weight: Black and silver: 36g (1.3oz); Brass: 68g (2.4oz)
$15.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Coil spring striker mechanism - Standard size, 50mm dome, features steel band clamps fits bars 22.2 to 26.0mm - Made in Japan
$15.99
Let everyone know your coming with Sunlite's Ding Dong Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.
$16.59 - $18.39
Origin-8's Ping Multi-Fit features a compact design and a multi-fit, no-tool mount.
$16.99 - $21.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Spring-loaded lever arm strike mechanism - Standard domes are 55mm wide and Mini domes are 45mm - Steel band clamps fits bars 22.2 to 26.0mm - Made in Japan
$16.99
The louder version of the Original Incredibell. The Incredibell XL is a little bigger and comes with the same pivoting dinger. - Dome Diameter: 43mm (1.7') - Fits handlebars with 21.7mm – 26mm (.85' – 1.03') outside diameters
$17.99
The Incredibell Clever Lever has a very pleasant double ding sound. The unique lever can be pivoted to any position so it can be easily reached by the thumb or another finger. - Dome Diameter: 38mm (1.5") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters
$17.99
•Great novelty Horn / Bell combination •Combination of Ringer bell and Squeeze horn •Fits most handlebars
$19.00
Available with either polished brass or chrome plated dome. Striker can be adjusted for individual comfort. - Dome Diameter: 45mm (1.7") - Fits handlebars with 22mm – 25.4mm (.86" – 1") outside diameters
$19.90
- Designed with road drop bars in mind - Can mount on the brake hood, On cable housing, And on some flat bar levers (Levers need to have flat section less than 9mm deep) - Clamps on with a screw. Simply turn the bell dome to loosen and tighten - Reversible for right and left hand use - Does not use a spring loaded clip - Made in japan
$19.99
Let people know you're coming through. And do it in style. The perfect way to say 'Hello' Or 'hey there,' 'coming through' and 'sup'. We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Product details: - Proprietary spring ringer - Fits standard bicycle handlebar - Includes attachment hardware Specs: - Clamp: 22.2mm - Material: Brass
$19.99
The perfect way to say 'Hello'. Or 'hey there,' 'coming through,' and 'sup'. We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Let people know you're coming through. And do it in style. Details: - Proprietary spring ringer - Fits standard bicycle handlebar - Includes attachment hardware
$19.99
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.
$21.00
Our Trail Bell announces your presence while letting you keep both hands firmly on your grips and goes silent with just the flick of a switch. Fits all handlebars from 22.2 to 31.8mm.
$21.90
- Crane bells are some of the finest bells available - Timeless designs with a loud and clear tone - Features the Cat-Eye Flex-Tite bracket, which installs without tools on most areas of the cockpit. - Made in Japan
$21.90
- Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available - Mini brass bell with alloy clamp - Headset spacer version includes a spacer to work with 1" or 1-1/8" steer tubes - Suzu: lever strike - 45mm in diameter
$21.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Spring-loaded lever arm strike mechanism - Standard domes are 55mm wide and Mini domes are 45mm - Steel band clamps fits bars 22.2 to 26.0mm - Made in Japan
$21.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Spring-loaded lever arm strike mechanism - Standard domes are 55mm wide and Mini domes are 45mm - Steel band clamps fits bars 22.2 to 26.0mm - HS: Headset version mounts on the fork, leaving more space on handlebars - Made in Japan
$24.00
Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty
$24.99
- The bicycle bell has a diameter of 80 millimeters - Thanks to the loud "ding dong" sound, you can be heard clearly by other road users and pedestrians - The Basil Bloom Field Big Bell has an attractive sky blue finish
$24.99
- Stylish bike accessory for your bike through beautiful bohemian print. - Makes a resounding ding dong sound.
$24.99
- Bell diameter: 60mm
$24.99
The Basil Portland Bell Brass makes an instant impression. The timeless silver finish ensures an easy complement to almost any bicycle frame, while the bell itself is easily mounted to your frame, with no complex installation to worry about. When rung, this bell emits an audible sound that’s loud enough to alert other cyclists, motorists and pedestrians of your presence.
$24.99
Classically designed bicycle bell featuring modern materials and a robust machined-aluminum handlebar mount. The bell dome and striker are crafted from high-quality brass with a sturdy stainless steel spring. Its secure base quickly mounts to most modern bicycle handlebars (25.4mm or 22.2mm diameter) with a stainless steel Torx bolt. And its narrow design attaches neatly between other handlebar accessories. It provides a powerful ring that’s excellent for all cyclists and commuters alike. This bell is engineered to be extremely durable with excellent resistance to weather-related wear-and-tear. This lightweight and stylish ringer is the ultimate bicycle bell. - Compact, classic bell-shape construction for a high-quality sound - Bell and striker are made from high-polished brass - CNC-machined aluminum hard handlebar mount, designed for 25.4 - 22.2mm tube - Molded rubber shims add grip and fine tune fitting - Stainless steel hammer - Impressively loud ring - Weight: 34g
$24.99
Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell Classic. This bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.
$25.00
Announce your presence with Portland Design Works' King Of Ding II Bell. This solid brass bell rings loud and clear. - Solid brass bell - Brass striker - Alloy mounting - Fits 22.2 - 25.4mm handlebars
$26.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Features a unique Crane insignia on top of the bell - Mounts with steel band and features lever strike operation - 57mm dome and fits bars 22.2mm to 31.8mm - Made in Japan
$26.99
- Uses one 9v battery (not included) - Fits most handlebars
$28.00
Coming in hot! This limited edition King of Ding II is laser-engraved "COMING IN HOT." Perfect for speed demons, messengers, cat6 champions, and anyone else who "can't stop, don't want to." The bell is made of solid brass and comes equipped with a brass striker for a loud clear ring that's sure to clear the path. The alloy mount is easy to install and fits 22.2 – 25.4mm handlebars.
$29.99 - $34.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Mounts with steel strap and features lever strike operation - Fits bars 22.2mm to 31.8mm - Made in Japan
$29.99 - $36.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available - Mounts with steel strap and features lever strike operation - Fits bars 22.2mm to 31.8mm - Made in Japan
$35.99
- 120db electronic rechargeable bicycle horn with remote - USB 280mAh rechargeable battery charges in 1.2 hours and lasts approximately 30 days or 2500 uses - Charging indicator light shows red when charging, and green when fully charged - IP65 water and dust proof - Compatible with 22.2 - 31.8mm handlebars - Whistle, horn, and alarm sounds
$39.95
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 22.2mm handlebars - Weight: 31.5g
$39.99
Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Aluminum striker and clamp - Fits on 22.2, 24.0 and 25.4mm OD bars - Made in Japan
$40.99
- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting
Previous page Page 2 of 2