T1 Plus Aluminum Aerobars with a double-ski bend shape allow riders to get in a lower rider position, minimizing drag, and allowing for more power output with a neutral hand position. - 6061-T6 Aluminum construction; shot peened with anodized finish - J2 Bracket: The extension bracket, isolated from the basebar bracket, allows for a wider range of armest adjustment possibilities. Easily adjustable in length and angular rotation for a customized fit. - F-19a Aluminum Armrest: 4 position fore/aft adjustment along with 15° of rotational adjustment to dial in the fit. Velcro-backed EVA Foam pads affix directly to armrest without additional straps. - Ability to increase stack up to 80mm with optional Aerobar Bracket Riser Kit. Tech specs: - Stack: 60mm-120mm - Reach: Max Aft -180mm, Max Fore 70mm - Extension Adjustment: 155mm-290mm (C of basebar-End) - Width: 145mm-300mm (center to center) - Center Clamp Diameter: Fits 26.0mm and 31.8mm bars - Color: Anodized Matte Black - Weight: 503g
The T1+ Carbon Aerobar extension offers multiple handgrip positions including a high angle resting hand position for improved aerodynamics and ergonomics. Anchored by the J5 bracket with the streamlined Inline Compression Clamp (ICC), this bar provides single bolt extension adjustment so that dialing in your fit is simple and easy. The updated offset bridge matched with the F40tt armrest gives the system enormous range of reach and width adjustability. For additional integration, an optional BTA bridge is available. Tech specs: - Bracket: J5 Bracket - Armrest: F40tt - Stack: 55mm – 125mm (w/Aftermarket Riser Kits) Reach: -9mm – -77mm (7.5mm Increments) - Width: 155mm – 296mm (Center to Center) - Extension Length Adjustment: 218 – 318mm (Center of Basebar to Tip) - Extension Length: 353mm - Extension Height: 90mm - Extension Angle: 50 degrees - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 585g
Profile's T1+ Clip-on Aerobars feature Stryke-bend extensions with length, width and arm-rest adjustment so you can easily achieve your perfect aero position. The 6061 aluminum extensions keep weight down, while the forged brackets provide strength exactly where you need it. You'll get fast and stay there thanks to J2 brackets for an adjustable lower arm position, giving you an edge over your competition whether it's other racers or your own personal record.
T4 Plus Aluminum Aerobars with high-performance shallow ski-bend extensions offer a single wrist angle with low extension height for a more aerodynamic position. Includes anatomic F-19 Armrest. - J2 Bracket: The extension bracket, isolated from the basebar bracket, allows for a wider range of armest adjustment possibilities. Easily adjustable in length and angular rotation for a customized fit. - F-19a Aluminum Armrest: 4 position fore/aft adjustment along with 15-degrees of rotational adjustment to dial in the fit. Velcro-backed EVA foam pads affix directly to armrest without additional straps. - Ability to increase stack up to 80mm with optional Aerobar Bracket Riser Kit. Tech specs: - Bracket: J2 Bracket - Armrest: F-19a Aluminum Armrest - Stack: 60mm-120mm - Reach: Max Aft -180mm, Max Fore 70mm - Extension Adjustment: 125mm-275mm (center of basebar-end) - Width: 145mm-300mm (center to center) - Center Clamp Diameter: Fits 26.0mm and 31.8mm bars - Weight: 469g
V4 Plus Aerobars have shallow-bend extensions designed to provide a more aggressive ride position with relaxed wrist angle. The aerobar features a low stack armrest position and forged bracket system that places the extensions below the basebar. - L1 Brackets: 6061-T6 Aluminum forged bracket system designed to place the armrest at the lowest stack possible and the extensions underneath the basebar - F-19a Aluminum Armrests: 4x fore/aft positioning, providing 45mm of adjustment while also allowing for 15-degrees (+/- 7.5-degrees) of rotation adjustment to angle armrests for a customized fit and Velcro-backed EVA foam pads that affix directly to armrest without straps - Extensions design specific for under-the-bar mounting Tech specs: - Extension: V4+ Aluminum - Stack: 35mm - Reach: -90mm, -75mm, -60mm, -45mm - Width: 150mm - 305mm - Extension Adjustment: 160mm – 275mm - Clamp: Fits 26.0mm and 31.8mm bars - Weight: 480G
The Aeria Evo maintains the aerodynamics of the original version but increases the ability for the rider to get into their best possible position. The expanded fit range and tilt capability make it a class leader for adjustment and position optimisation. Specifications - The Aeria Evo is an update of our well proven Aeria bar. We have evolved the fit range of the bar with new brackets, armrests and extensions. - The new brackets add the ability to tilt the entire assembly, as well as letting the armrests - go much narrower than the first generation design. - A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The new Ergo armrests increase rider comfort with a smoothly curved shape and expand the fit range with an expansive set of adjustment options. - The extension rotation can be easily adjusted using the shaft bolt. There is a 40mm range of extension length adjustment once the extensions have been cut. - The bracket can be tilted by up to 10 degrees. - There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1700 possible configurations of Reach, Stack and Pad Width. Adding in the tilt factor magnifies this adjustment range even further. - All hardware and component pieces were not only designed for performance and ease of use but also strength. - Basebar Width: 42cm (Center-to-Center) - Basebar: Carbon - Pursuit Reach: 157.5mm (center to tip) - Bracket: Aeria Evo (6061-T6 aluminum) - Armrest: Ergo - Armrest Stack: 56mm to 80mm (5mm Increments) - Armrest Offset: -66mm to 1.5mm (7.5mm Increments) - Armrest Width: 100mm to 266mm (18.5mm Increments) - Extension Length Adjustment: 40mm - Extension Length: 340mm - Extension Height: 80mm - Extension Angle: 35° - Extension Material: 6061-T6 aluminum, pre-drilled for bar-end shifter cable - Armrest Rotation: 7° - Bracket Tilt Adjustment: 0-10° - Weight: 809g
The Airwing has a deep drop to keep you in a wind-cheating aero tuck, making this a perfect base bar for triathlons and time trials. Made from double-butted 6061 aluminum, the Airwing is super light and boasts a wide clamping section that will accept any Profile Design clip-on aero bar. Plus, it's shot peened and anodized for added strength and durability and pre-drilled for internal cable routing for aerodynamics and a clean look.
Profile's Stoker 26 Base Bar features a 26.0mm diameter the entire length across the bar, allowing the widest aero bar clamping area that Profile makes. This makes the bar ideal if you have a wide aero position or need a comfy stoker bar for your tandem. Made from double-butted 6061 aluminum, the Stoker 26 is light, not to mention shot peened and anodized for added strength and durability. Plus, it's pre-drilled for internal cable routing for aerodynamics and a clean look.
Reversible basebar wing improves fit for bicycles with smaller headtubes. Two-Way Fit System: Standard fit provides a low drop for aggressively positioned athletes who favor or fit needs dictate a low out-of-the-aerobars position which translate to fast, aggressive riding style. Flip the bar for an elevated position ideal for riders requiring higher stack in their cockpit position and higher relative pursuits. - Straight Brake Extensions: Straight, ergonomic brake extensions help maintain control while remaining aerodynamic. - Clean Cable Routing Pre-slotted internal cable routing on both sides for a clean profile. Di2 Compatible. - Weight: 220g (42cm) - Width: 40cm (center to center) - Center Clamp Diameter: 31.8mm - Clamp Width: 100, 120, 140mm - (44mm) - Clip Compatible: Yes - Material: Multi-Direction, Multi-layer Carbon Fiber - Pursuit Reach: 160mm (center to tip) - Pursuit Drop: ±20mm - Pursuit OD/ID: 25.4 / 19.5mm - Drop Outsweep: No
The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops
Page 1 of 1