Shimano's Dura-Ace Di2 takes shifting to the next level. The Rear Wiring Kit connects to both the left and right shifters and Junction Box A (which displays battery power and allows manual adjusting). It also includes a battery mount, cable covers to route and hide the cables and a wire plug/unplug tool.
Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.
Shimano Rear Derailleur Pulley Assemblies
Shimano Chainring Bolts - For use with FC-6800 46t outer chainring - Color: Black - Length: 10 mm - Material: Aluminum - Type: Torx
$17.99 - $19.99
Shimano STI lever hoods. - Fits Ultegra ST-6700 levers only
$6.00 - $20.00
Chainstay protectors to guard your Salsa frame from scratches and damage.
SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame. - Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups
$32.99 - $34.00
Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
Ergonomic design for comfort in a variety of hand positions. -Compatible with SRAM eTap Shifting/Brake Levers
Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
Useful on some bikes with 135mm rear dropout spacing that have cranks with longer spindles.
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
This is a Connectamajig hose kit for replacing your Reverb's hydraulic line. - Fits all generations of Reverb Stealth - Includes Connectamajig, new hose, new strain relief, new barb - 2000mm hose
- Securely hide your Di2 Battery within your seatpost - Di2 battery sold separately
$24.99 - $27.99
Profile Design's Lux Pads keep both performance and comfort high, exactly where they need to be when you're pushing your boundaries. These velcro backed pads fit Profile Designs F-35 armrests (sold separately), and feature EVA foam, an anti-microbial cover, and a contoured edge for improved long-term comfort. They're even available in three thicknesses so you can dial in your fit to perfection.
J Brackets Kits customize stack height, extension position, and ride position of Profile Design Aerobars. - The J2 Bracket has an adjustable clip-on system with the armrest bracket isolated from the basebar bracket; providing a wide variety of for-aft adjustment of the aerobar and armrest position, stack height, and width adjustment - Standard on all T Plus Aluminum Aerobars - Made of Forged and CNC 6061-T6 Aluminum - Clamp diameter: 31.8mm bracket, 22.2mm extension - 12.9-grade bolts for added strength and corrosion resistance
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Fits Profile Design's F-18 through F-22 Series armrests, providing a low profile mount for arm pads. - Construction: 6061-T6 Forged Aluminum - Availability: Two kits to choose from: 31.8mm for flip-up styles or available in 31.8 for non flip-up style. - Weight: 65-70g - Does not include bottom clamp
$30.25 - $41.85
The Problem Solvers Center Lock Rotor Adapters are CNC-machined aluminum adapters that allow the use of 6-bolt rotors on Shimano's Center Lock hubs. There's a model for standard Center-Lock lockrings and one with a pinch-bolt for hubs that have damaged threads.
The Problem Solvers Clamp-On Cable Guides are for clamping on the rear brake cable housing on your frame when the frame doesn't have provisions for holding a full-length brake cable housing. You get 3 stainless-steel clamps and the nuts and bolts for them.
Problem Solvers Deckster pedal adapters. Converts SPD-compatible pedals to platform pedals for casual cruising. • Works with 2-bolt, SPD-style cleats, such as Time, Shimano, Crank Brothers, Wellgo and others. Not compatible with Speedplay • Cleats not included • 85 x 95 x 10mm platform • Hardware included, cleats not included
$9.99 - $15.90
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
$14.15 - $23.50
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.
$1.98 - $16.28
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
The Pro Braze-On Chain Catcher from K-EDGE is used by most professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia. The Pro model is designed to improve on the original K-EDGE Chain Catcher design: - Easier Installation – Independent setup and installation of front derailleur and the K-EDGE Chain Catcher - Stronger – Separate and lower attachment /adjustment bolt equates to stronger hold ensuring the chain cannot drop below the chain catcher - Optimized Design – Unique curved ramp profile enables quicker chain engagement with the chain ring while eliminating dropped chains - Material: 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamp. Shimano - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
$27.99 - $84.99
Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better braking response - High carbon internal steel coil for improved stiffness - Appropriate for Teflon coated cables as well as steel and galvanized
The Greenfield KSRF rubber foot is a rubber nub that attaches to the bottom of your kickstand to prevent tipping. Made from rubber and made in the USA. - Fits all Greenfield kickstands and most generics
$9.99 - $12.99
This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface