Parts & Accessories

Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Not self-extracting

- XT M8130 12 speed crankset - Fits 157mm SuperBoost MTB frames - Hollow forged crank maximizes power transfer while limiting weight - Direct mount chainring type (TL-FC41 tool included) - Q-factor: 181mm - Chainline: 56.5mm

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 5mm thick - 5 spacers per bag - Machined engineering-grade Delrin

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!

TruVativ's Stylo All Mountain Guard is all-mountain chainring protection with style. This 4mm thick aluminum guide is 4 bolt, 104 BCD compatible.

eeWings Stainless Steel fixing bolt to replace Titanium fixing bolt 14mm Tool and bolt washer included

Replacement crank spindle for Easton EC90 SL cranks

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.

Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts

- Enables the use of various cranks with BB386EVO PF30 or BB30 bottom brackets - Spacers and adapters only specific bottom brackets are required and sold separately - Spindle Interface: SRAM GXP

Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.

Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.

• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Cotterless

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0

Replacement crank arm for GX Eagle GXP

For Race Face 30mm Cinch System cranks only. Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle. - 30 x 136.5mm is for 120mm spaced BMX hubs and 68/73mm BBs - 30 x 151.5mm is for 150/157mm Hubs

RaceFace CINCH Crank Bolt and Puller Cap Sets.

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 4

The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms. - Designed to fit Shimano Ultegra 6800 cranks - Includes 4 T30 Torx bolts and 4 bolt covers - Not compatible with absoluteBLACK Sub Compact oval chainrings

Crank left arm, Blaze Powerspline, 175mm, pitch black

Spacers to insure proper chainline and chainring spacing on your bike. • 0.6mm thick • Sold in a bag of 20 spacers

Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers

Replacement spindle spacers for Race Face X-Type XC/AM cranksets.

RaceFace Crank Arm Fixing Bolts - M15

- Thermoplastic Beavertail protects chainring from impacts - For 1X and 2X drivetrains

- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool