Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$79.99
Replacement Freehub body for I9 Hydra, I9 1/1, and Crankbrothers Hubs
- Shimano MS/Synthesis Base Alloy Driver
$8.00
A non-tubeless protective strip to cover the spoke holes in your ENVE carbon clinchers.
$8.49 - $25.49
Replacement axles for MX-2000 hubs.
Size: 14 x 100 x 165mm
- Supplier Part: KT-M18F
- MPN: 370666
- Front/Rear: Front
- Diameter: 14mm
- OLD: 100mm
Size: 14 x 110 x 180mm
- Supplier Part: KT-389R
- MPN: 370668
- Front/Rear: Rear
- Diameter: 14mm
- OLD: 110mm
Size: 3/8-inch x 100 x 165mm
- Supplier Part: KT-M17F
- MPN: 370667
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 180mm
- Supplier Part: KT-M88R
- MPN: 370682
- Front/Rear: Rear
- Diameter: 14mm slotted for 3/8-inch
- OLD: 110mm
$15.99
Replacement axles for Black Ops MX-1100 hubs.
Size: 3/8-inch x 100 x 140mm
- Supplier Part: KT-576F
- MPN: 370664
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 152mm
- Supplier Part: KT-5V3R
- MPN: 370665
- Front/Rear: Rear
- Diameter: 3/8-inch
- OLD: 110mm
$18.95
- Non-quick release design for added security
- Alloy anchor nut includes Anti-Spin tab which prevents unwanted turning of nut when tightening or loosening the hex through-bolt
- XL version compatible with thicker dropouts (up to 10mm thick)
- Torque to 7 N
- Wheel: front/rear
- Spacing (front/rear): 100/135mm
- Shaft: Chromoly
$10.50 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3
$40.00
Salsa's Ti Flip-Offs are as beautiful to the touch as they are to the eye. Lightweight. Smooth. Recommended for road use or rigid front mountain bike use only. Available in a whole host of colors.
- Beautifully machined and hand-friendly
- Black, Silver, Blue, Red, Green, Orange, Purple, or Pewter
- More than just eye candy, they’re hand candy, as well
- Weight: 44g
$69.99 - $73.99
- Grade 3 balls and magnetite rust proof finish
- Abec 5 precision and silicone w seals
- 3 times cryogenic race treatment
- Bearings sold individually, not as pair
$24.19
- Supplies full wheel illumination for 700c/29in wheels and smaller
- Approximately 40 hrs of battery life
- Water resistant design
- Includes 3 (AA) batteries
- Sold individually (1 wheel)
- Easy to install
$12.59
- Variable widths
- Left: 32mm
- Center: 52mm
- Right: 32mm
- Length: 116mm
- Overall: 137mm
$12.59
- Variable widths
- Left: 32mm
- Center: 52mm
- Right: 37.5mm
- Length: 121.5mm
- Overall: 142.5mm
$34.00
Who knew we could make a thru axle disappear? The Maxle Stealth offers a light, low profile alternative to Maxle Lite.
Features
- 34g lighter than Maxle Lite
- Easy installation with a 6mm Allen wrench
$2.79 - $3.79
Replacement Axle nuts for three speed Sturmey Archer hubs.
$14.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
$42.00 - $48.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option.
Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes.
- Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles.
- Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design.
- Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength.
- Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal.
- Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
- The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry.
- No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
$22.99
Replacement 12x100 Adapters for HEX 28 Gravel Front Hubs.
Compatible with:
- HEX Gravel J-Type Front Wheels
Not compatible with:
- HEX Straightpull or HEX J-Type 32H Front Wheels
- Boost front wheels
- SPIKE/OOZY/SPOON hubs
- HEX 32 J-Type or 28 Straightpull Front Hubs.
$9.95
The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it.
- Made in Minnesota to aerospace standards
$21.95
Classic & Comp Road Wheels Front Axle Adapter.
$22.99
- Adapts HEX J-Type 135/142 and Gravel Rear Hubs to 12x142mm.
- Adapts HEX J-Type R150/157 Rear Hubs to 12x157mm.
- Also compatible as replacement adapters for HEX J-Type and Straightpull Boost R148 Rear Hubs.
Compatible with:
- HEX J-Type 135/142, 150/157, and Boost 148 Rear Wheels
- HEX Straightpull Boost 148 Rear Wheels
- HEX J-Type Gravel Rear Wheels
- XD and HG Freehub Bodies
Not compatible with:
- SPIKE/OOZY/SPOON hubs
$22.99
Adapts HEX 32 J-Type Front Hubs to 15x100.
Compatible with:
- HEX J-Type 32H Boost and non-Boost Front Wheels
- Also compatible as replacement 15x110 adapters for HEX 32 J-Type Boost Front Hubs.
Not compatible with:
- HEX 28 Straightpull or HEX Gravel Front Hubs
- HEX Straightpull or Gravel Front Wheels. (see HEX 28 front hub adapters)
- SPIKE/OOZY/SPOON hubs
$6.18 - $9.79
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$52.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option.
Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes.
- The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry.
- No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
$14.52
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 14.8mm - Length: 10.6mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Shimano HB-C201 Front - 105 HB-1050 Front - Deore LX/Mtn LX Front - STX HB-MC32/30 Front - Shimano HB-A410, HB-A416 Front
$14.52
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 14.8mm - Length: 10.5mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Road 400 CX Front - HB-RM40 Front - Shimano HB-RM40 Front - HB-RA50 Front